Drilling steel in just a few seconds

Drilling steel in just a few seconds
Around 9 seconds using an 18v handheld drill at the jobsite is what it takes to make each hole in our 3/8" thick steel Übermächtig bracket. (See video below) The critical thing is to have the right type of drill bit and of course it must be sharp. To be sure you'll have the right one we include an industrial quality drill bit in the hardware packet with every order. Our spectacular Übermächtig solid steel bracket doesn't have any holes predrilled because naturally we have no idea where the studs are going to be on your wall.

Reading next

Two six inch floating shelves mounted on a wall
Closet Shelves

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.