LED Lighting Prep

We prep your shelves so LED lights sit flush and look custom-installed. Order one add-on per shelf you want prepped.

Floating shelves with lighting channels mounted on a wall

LED Channel Prep

$35.00 / shelf

We prepare shelves for LED tape lights, we do not sell the lighting.

Our channel will fit many of the strips available today, the inside dimension is 11/16” wide x 5/16” deep.

The ends of the channel locate 1" in from the ends of the shelf.

The minimum distance from the front or back edge is 2”, you may specify any dimension you like. You may specify multiple channels per shelf.

Channel location (optional — where the recess should run)

LED Puck Drilling

$20.00 / shelf

Holes drilled at your specified positions for recessed puck lights. Upload a sketch of your shelf with the hole locations marked — we drill to match.

Shelf sketch (optional — JPG, PNG, HEIC, or PDF, max 15 MB)

Both add-ons are purchased per shelf. Order one for each shelf you want prepped.

Accent lighting for your shelves

Two important things to have in mind when planning your lighting installation:

1) The wiring to connect this sort of lighting is typically for use inside kitchen cabinetry and the like, and isn’t building code-acceptable for installation in a wall cavity unless encased in solid conduit.

2) Just about all LED strips must be plugged into a transformer or driver, so you’ll need to find a serviceable location for the driver.

We can install the channel or drill for pucks in any type of our wood shelves.

SHOP SHELVES